Reference: Supported Hardware
The following WAGO hardware and Modbus devices are officially supported and tested for use with WEVA.
WAGO Energy Analyzers​
WEVA includes pre-defined register maps for the following energy analysis modules.
| Model Number | Description | Communication Protocol |
|---|---|---|
| 879-8421 | 3-Phase Power Measurement Module | Modbus TCP/RTU |
| 879-8413 | Compact Energy Meter | Modbus TCP |
| 879-8412 | Energy Meter with Current Transformers | Modbus RTU (via Gateway) |
WAGO Controllers (WDX Runtime Hosts)​
These controllers can host the WDX runtime or act as Modbus-slaves for a central host.
- PFC200 Series: 750-8212, 750-8216.
- Touch Panel 600: Advanced visualization and control panels.
- Edge Controller: Optimized for high-frequency data logging.
Technical Specifications for Generic Devices​
Devices not listed above can be integrated if they adhere to the following specifications:
- Protocol: Modbus TCP/IP or Modbus UDP.
- Register Types: Holding Registers (03), Input Registers (04).
- Data Formats: Float32 (Big Endian), Int16, Uint32.
Image: Diagram showing physical wiring between a WAGO 750 series controller and an 879 series meter.
Next Step: Modbus Register Maps